![]() Connector Type:ĝ80, Ferrule for free standing fiber.The complete structure is torsion- and stress-free mounted, but mechanically extremely stable. ![]() Optionally available with end caps and mode stripping. The passive heat sink as well as 4mm copper ferrule allow a high thermal efficiency due to a very good heat dissipation. Laser cables High Power D80 Passive cooling – up to 500 W are mainly used in the area of material processing such as laser cutting or laser welding. Laser Cable High Power D80 Passive Cooling – up tp 500 W.The Ferrullenbereich is guaranteed glue-free. The heat sink is dimensioned depending on the power. In principle, only free-standing fibers and ferrules of good heat-conducting copper alloys are used. The High Power D80 connector is available in different versions with passive or active cooling.Laser Cable High Power SMA-Active Cooling – up to 500 W.Protective Tubing: Metal, Bending Radius limited.Connector Type: HP-SMA, Ferrule for free standing fiber.Laser Cable High Power SMA Passive Cooling – up to 500 W.Laser Cable High Power SMA-FM Copper – up to 100 W.Protective Tubing:ğRNC, Metall, Bending Radius limited.Bending Radius long term:ē00 x Cladding Diameter.Bending Radius short term:đ00 x Cladding Diameter.Laser Cable High Power SMA-FM – up to 50 W.Protective Tubing: FRNC, Metall, limited bending radius.Bending Radius long term: 300 x Claddingdurchmesser.Bending Radius short term: 100 x Claddingdurchmesser.Connector Type:ğSMA, Ferrule for free standing fiber.Laser Cable High Power SMA-FK up to 50 W.Otherwise, it is advisable to use a correspondingly sized heat sink at 10 watts, assuming that 1% of the power in the cladding (cladding) is performed. For powers up to 100 watts, no heat sink is usually required, provided that the cladding modes are not stripped off. Ideally, the spot diameter should make up about 80% of the fiber core. Above all, the core diameter of the fiber, the beam profile of the laser and, in addition, the spot size of the focused laser beam and its centric alignment with the fiber core. HP-SMA connectors are available in different versions, depending on the power transferred.Protective TubingğRNC, Metal/Silicon, Metal/PU, Bending Radius limited.Bending Radius long termē00 x Cladding Diameter.Bending Radius short termđ00 x Cladding Diameter.Protective Tubing: FRNC, Metall/Silikon, Metall/PU, BiegeradiusbegrenzungĮxecution with ZrO2 ferrules for single and multimode fibers up to 128μm cladding diameter and metal ferrules for fibers with a cladding diameter from 128μm.Bending Radius Long Term: 300 x Claddingdurchmesser.Bending Radius Short Term: 100 x Claddingdurchmesser.Protective Tubing: Metal, PVC (Aramid-Strain Relief ), Silicone.Applfications: Laser, Sensors Spectroscopy.Starting with the selection of the right fiber over connectors up to the protective jacket. Several designs are offered according to the performance and application requirements. Spectroscopy, sensors, laser light transmission from milliwatt to 2-digit watt range. The low power fiber cables are used in various applications such.Fiber optic cables for laser beam delivery up to 1 kW.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |